More Mobile Software

Your SAC Rate and Average Depth - in part and in total

Sometimes we have a dive where we get obsessed with analyzing it afterwards. Or maybe you're like that all the time! Either way, wouldn't it be nice to look at a "piece" of the dive?


On the Environment tab, if all of the required information about your tank is filled in, you can get a SAC Rate (RMV) over the length of the dive as shown in the photo above. If you only used one tank over the course of your dive, then the SAC rate for this tank will also be for the whole dive. Unless you're doing some technical multi tank diving, this is the case for most people.

Dive Log, Dive Log Manager, and DiveLogDT all use the Respiratory Minute Volume (RMV) method of calculating your SAC rate so that you can compare your rate over *all* your dives, regardless of which tank (size) you used. This is the volume of gas you breathed in 1 minute at the surface. If you use Imperial units, it will be "cubic feet per minute", and if you use metric units, it will be in "liters per minute". You can use this number to plan a future dive, regardless of what kind or size of tank you will use.

If you want to take a "deep dive" into analyzing your SAC rate for a particular dive, you can do this on the profile tab. (This assumes you have a dive computer that logs your tank pressure over the course of your dive).


In the image above, we're looking at the same dive as the first image, however we're looking at just a portion of it. By "clicking (and holding) and dragging" over the time axis of the graph, you can select a *portion* of time and find out what your average depth was for that portion, and what your average RMV rate was for just that portion.

From the images, we can see that Jane Diver had an average RMV rate over the course of the whole dive of 0.34 ft3/min and an Average Depth of 47 ft. But in the second image, while starting her ascent at the end of the dive, she had an average RMV rate of 0.26 ft3/min while still maintaining the same Average Depth. Apparently she was much more mellow on her way back!

When clicking and dragging, you can look at the "Time" value at the top of the profile to determine exactly what portion you are looking at. It will change when you click, and update when you drag, so that if you want to know exactly the period of time you're analyzing, you can.

We have had some requests from customers to show a different kind of SAC rate calculation, sometimes called "Surface Gas Consumption". This is an absolute measure of gas over time, and is only useful when using the same kind and size of cylinder over subsequent dives. It is simply the amount of gas you have used in a period of time, adjusted to the surface pressure. Again, if you're using Imperial measurements, this number will be in "psi per minute", and if you're using Metric units, it will be in "bar per minute". We have added an Application Preference to toggle between the two kinds of SAC measurements. If you open the Preferences Window, navigate to the Profile tab, you will see a checkbox at the bottom "Calculate SAC (not RMV)". If this is checked, you will instead see a "SAC" rate when selecting a portion of the dive as above. The image below will show SAC rate using Metric units.


Happy Analyzing! Happy Diving!

Quick Add - Logging in a hurry

If you have used our software, you know that it logs individual Dives, and that a Dive can have many other items associated with it, such as a Dive Site or Equipment or a "tag" called a Dive Type. When logging a dive, sometimes you have lot's of time afterwards to sit and record everything in great detail and luxuriate over the details while you remember what a great time you had. But let's face it, sometimes you need to just quickly "get it done" so you can do something else. That's when you may want to do a "Quick Add" of an item while you're logging your dive.

You can "Quick Add" any of the dropdowns on the Detail tab of a dive. Just type in the name and tab to the next thing. If that name doesn't already exist in the list of those items, you'll get a small bubble window telling you that the new item has just been added. This works for Site, City, Country, Shop, and Trip.


When there is a list of items that can be added, you can also add a new one by clicking on the "plus" sign in the upper corner. Once clicked, you'll get a popup window you can just start typing in. Hit return and the new list item has been added and you can continue logging. This works for Buddies, Dive Types, and Equipment.


Happy Diving! (and Dive Logging!)